Send message

8618631199200

Your position:

Home > PRODUCT > Instrumentation Cable > PE Instrumentation Cable

Unarmoured Instrumentation Cable PVC-OS-PVC BS5308 Cable Part 2 Type1

Unarmoured Instrumentation Cable PVC-OS-PVC BS5308 Cable Part 2 Type1

Conductor: Annealed copper

Insulation: Polyvinyl chloride compound (PVC)

Binder tape: Polyester tape

Screen: Al-PET tape with tinned copper drain wire

Outer sheath: Polyvinyl chloride compound (PVC)

Package : Export wooden drum & iron wooden drum or as customer require

Email:uvlead@aliyun.com

Email:tlfast@aliyun.com

Send message Whatsapp

Share with:

OVERVIEW CONSTRUCTION TECHNICAL PARAMETER

Unarmoured Instrumentation Cable PVC-OS-PVC BS5308 Cable Part 2 Type1 Application:

The unarmoured versions (Part 2 Type 1) are generally use for indoor installation and suitable for wet and damp areas. Generally used within industrial process manufacturing plants for communication, data and voice transmission signals and services, Also used for the interconnection of electrical equipment and instruments, typically in chemical or petrolchemical industry.

Unarmoured Instrumentation Cable PVC-OS-PVC BS5308 Cable Part 2 Type1 Standard:

Cable design: BS 5308 BS EN 50288-7
Conductor: IEC 60228

CONSTRUCTION :

Unarmoured Instrumentation Cable PVC-OS-PVC BS5308 Cable Part 2 Type1 Construction

1.Conductor - Annealed or tinned copper, sizes: 0.5mm^2 and 0.75mm^2 mulitistranded(Class 5), 1.5mm^2 multistranded(Class 2) to BS6360
2.Insulation - PVC (polyvinyl chloride), type TI1 to BS 6746

Pairing -Two insulated conductors uniformly twisted together with a lay not exceeding 100mm

Color Code-Multicore cables: up to 40 cores yellow with black numbers, 41 -80 cores black with yellow numbers. Multipair cables:See technical information
3.Binder tape -PETP transparent tape
4.Filler - Non-hygroscopic material (if necessary)
5.Binder tape - Polyester tape
6.Collective Screen - Aluminium/polyester tape is applied over the laid up pairs metallic side down in contact with tinned copper drain wire, 0.5mm^2
7.Outer sheath - PVC Sheath, type TM 1 or type 6 to BS 6746

Sheath Color-Black or blue

TECHNICAL :

Conductor operating temperature: -20℃~90℃

Min. installation temperature: 0℃

Minimum bending radius: 5 x overall diameter

Conductor Area Size		mm 2	0.5	0.75	1.5
Conductor Stranding		No. x mm	16 x 0.2	24 x 0.2	7 x 0.53
Conductor resistance max		ohm/km	39.7	26.5	12.3
Insulation resistance min		Mohm/km	25	25	25
Max. Mutual Capacitance:pair or adjacent cores		pF/m	250	250	250
Capacitance between any core or screen max.		pF/m	400	400	400
Max. L/R Ratio for adjacentcores(Inductance/Resistance)		μH/ohm	25	25	40
Test voltage	Core to core	V	1000	1000	1000
	Core to screen	V	1000	1000	1000
Rated voltage max		V	300/500	300/500	300/500

PARAMETER :

No.of Cores	No.and Dia. of Wires	Nominal Conductor Cross-Sectional Area	Nominal Thickness of Insulation	Nominal Thickness of Sheath	Nominal Dia. of Cable	Approx. Weight
No.of Cores	no./mm	mm^2	mm	mm	mm	kg/km
1	16/0.2	0.5	0.6	0.8	6.2	60
2	16/0.2	0.5	0.6	0.8	7.6	80
5	16/0.2	0.5	0.6	1.1	12.4	200
10	16/0.2	0.5	0.6	1.2	16.5	340
15	16/0.2	0.5	0.6	1.3	19.2	480
20	16/0.2	0.5	0.6	1.3	21.7	570
30	16/0.2	0.5	0.6	1.5	26.4	880
50	16/0.2	0.5	0.6	1.7	33.4	1310
1	24/0.2	0.75	0.6	0.8	6.7	75
2	24/0.2	0.75	0.6	0.8	8.2	100
5	24/0.2	0.75	0.6	1.2	13.8	250
10	24/0.2	0.75	0.6	1.3	18.4	450
15	24/0.2	0.75	0.6	1.3	21.1	600
20	24/0.2	0.75	0.6	1.5	24.4	800
30	24/0.2	0.75	0.6	1.7	29.5	1080
50	24/0.2	0.75	0.6	2	37.6	1860
1	7/0.53	1.5	0.6	0.8	7.5	100
2	7/0.53	1.5	0.6	0.9	9.3	150
5	7/0.53	1.5	0.6	1.2	15.6	360
10	7/0.53	1.5	0.6	1.3	20.9	670
15	7/0.53	1.5	0.6	1.5	24.6	970
20	7/0.53	1.5	0.6	1.5	27.8	1230
30	7/0.53	1.5	0.6	1.7	33.7	1730
50	7/0.53	1.5	0.6	2	43	2740