Copper Multicore SWA Armoured Cable Application

These cables are used for electricity supply in low voltage installation system, They are suitable for installation in indoors and outdoors, in cable ducts, under ground, in power and switching stations, local energy distributions, industrial plants, where there is no risk of mechanical damage. The lead sheath brings an enhanced resistance to aromatic hydrocarbons.

Copper Multicore SWA Armoured Cable Standard

BS 5467 IEC 60502-1.

CONSTRUCTION :

Copper Multicore SWA Armoured Cable Construction

Conductor	Plain cicrcular, compacted or shaped stranded copper or aluminum conductor, conform to IEC 60228 class 2
Insulation	XLPE (cross-linked polyethylene), rated at 90°C
Bedding	PVC (Polyvinyl Chloride)
Armour	SWA (Galvanized Steel Wire Armour)
Sheath	PVC (Polyvinyl Chloride)
Rated Voltage	600/1000V

TECHNICAL DATA :

Copper Multicore SWA Armoured Cable Technical Data

STANDARD IEC 60502-1, BS 5467 and BS 6346
APPLICATION Distribution networks, Industrial use
CHEMICAL PERFORMANCE Chemical & Oil resistance: Good
MECHANICAL PERFORMANCE Minimum bending raduis: x15cable diameter (unarmoured)
Minimum bending raduis: x20 cable diameter (armoured)
FIRE PERFORMANCE Flame non-propagation base on IEC 60332-1
Reduced emission of Halogens chlorine<15%
TERMINAL PERFORMANCE Maximum service temperature: 90°C
Maximum short-circuit temperature: 150°C(max. 5s)
Minimum service temperature: -40°C

PARAMETER :

Copper Multicore SWA Armoured Cable Parameter

0.6/1kV-2 core copper conductor XLPE insulated steel wire armored PVC sheathed power cable
Nominal cross sectional area	Insulation thickness	Steel Wire diameter	Sheath thickness	Approximate outer diameter	Approx. weight	Max.D.C resistance of conductor（20℃）	Current carrying capacity
mm2	mm	mm	mm	mm	kg/km	Ω/km	In Air(A)	In Ground(A)
2X2.5	0.7	0.8	1.8	14.8	364	7.41	23	32
2X4	0.7	0.8	1.8	15.7	425	4.61	30	41
2X6	0.7	1.25	1.8	17.6	646	3.08	39	53
2X10	0.7	1.25	1.8	20.1	802	1.83	53	70
2X16	0.7	1.25	1.8	22.3	1008	1.15	68	91
2X25	0.9	1.6	1.8	26.3	1470	0.727	91	116
2X35	0.9	1.6	1.8	27.6	1712	0.524	112	140
2X50	1	1.6	1.9	30.8	2123	0.387	137	168
2X70	1.1	2	2	35.4	2974	0.268	172	203
2X95	1.1	2	2.1	39.5	3737	0.193	214	249
2X120	1.2	2	2.3	42.9	4453	0.153	249	284
2X150	1.4	2.5	2.4	48	5744	0.124	284	315
2X185	1.6	2.5	2.6	52.7	6811	0.0991	326	357

0.6/1kV-3 core copper conductor XLPE insulated steel wire armored PVC sheathed power cable
Nominal cross sectional area	Insulation thickness	Steel Wire diameter	Sheath thickness	Approximate outer diameter	Approx. weight	Max.D.C resistance of conductor（20℃）	Current carrying capacity
mm2	mm	mm	mm	mm	kg/km	Ω/km	In Air(A)	In Ground(A)
3X2.5	0.7	0.8	1.8	15.3	405	7.41	20	27
3X4	0.7	0.8	1.8	16.2	481	4.61	26	36
3X6	0.7	1.25	1.8	18.3	696	3.08	33	45
3X10	0.7	1.25	1.8	20.9	930	1.83	46	60
3X16	0.7	1.25	1.8	23.3	1191	1.15	59	77
3X25	0.9	1.6	1.8	27.6	1745	0.727	77	98
3X35	0.9	1.6	1.8	29	2100	0.524	95	119
3X50	1	1.6	1.9	32.5	2628	0.387	119	144
3X70	1.1	2	2.1	37.9	3728	0.268	151	175
3X95	1.1	2	2.2	41.8	4692	0.193	186	210
3X120	1.2	2	2.3	45.5	5645	0.153	217	242
3X150	1.4	2.5	2.5	51.3	7350	0.124	245	270
3X185	1.6	2.5	2.7	55.9	8698	0.0991	284	305
3X240	1.7	2.5	2.9	62.1	10837	0.0754	336	350
3X300	1.8	2.5	3	67.4	12990	0.0601	389	396

0.6/1kV-4 core copper conductor XLPE insulated steel wire armored PVC sheathed power cable
Nominal cross sectional area	Insulation thickness	Steel Wire diameter	Sheath thickness	Approximate outer diameter	Approx. weight	Max.D.C resistance of conductor（20℃）	Current carrying capacity
mm2	mm	mm	mm	mm	kg/km	Ω/km	In Air(A)	In Ground(A)
4X2.5	0.7	0.8	1.8	16.1	472	7.41	20	27
4X4	0.7	1.25	1.8	18.1	677	4.61	26	36
4X6	0.7	1.25	1.8	19.3	804	3.08	33	45
4X10	0.7	1.25	1.8	22.3	1088	1.83	46	60
4X16	0.7	1.6	1.8	25.7	1571	1.15	59	77
4X25	0.9	1.6	1.8	29.7	2085	0.727	77	98
4X35	0.9	1.6	1.9	31.4	2543	0.524	95	119
4X50	1	1.6	2	35.3	3214	0.387	119	144
4X70	1.1	2	2.2	41.2	4571	0.268	151	175
4X95	1.1	2	2.3	45.6	5782	0.193	186	210
4X120	1.2	2.5	2.5	51.2	7557	0.153	217	242
4X150	1.4	2.5	2.7	56.1	9080	0.124	245	270
4X185	1.6	2.5	2.8	61.3	10822	0.0991	284	305
4X240	1.7	2.5	3.1	68.1	13566	0.0754	336	350
4X300	1.8	2.5	3.2	74.1	16356	0.0601	389	396

0.6/1kV-5 core copper conductor XLPE insulated steel wire armored PVC sheathed power cable
Nominal cross sectional area	Insulation thickness	Steel Wire diameter	Sheath thickness	Approximate outer diameter	Approx. weight	Max.D.C resistance of conductor（20℃）	Current carrying capacity
mm2	mm	mm	mm	mm	kg/km	Ω/km	In Air(A)	In Ground(A)
5X2.5	0.7	1.25	1.8	17.9	645	7.41	20	27
5X4	0.7	1.25	1.8	19.1	770	4.61	26	36
5X6	0.7	1.25	1.8	20.5	925	3.08	33	45
5X10	0.7	1.6	1.8	24.6	1417	1.83	46	60
5X16	0.7	1.6	1.8	27.6	1812	1.15	59	77
5X25	0.9	1.6	1.9	32.2	2460	0.727	77	98
5X35	0.9	1.6	2	34.1	3019	0.524	95	119
5X50	1	2	2.2	39.7	4166	0.387	119	144
5X70	1.1	2	2.3	44.9	5443	0.268	151	175
5X95	1.1	2.5	2.5	51.3	7485	0.193	186	210
5X120	1.2	2.5	2.7	55.9	9026	0.153	217	242
5X150	1.4	2.5	2.8	61.4	10912	0.124	245	270
5X185	1.6	2.5	3	67.6	13119	0.0991	284	305
5X240	1.7	2.5	3.3	74.8	16427	0.0754	336	350
5X300	1.8	3.15	3.5	83.2	20915	0.0601	389	396

0.6/1kV-3+1 core copper conductor XLPE insulated steel wire armored PVC sheathed power cable
Nominal cross sectional area	Insulation thickness	Steel Wire diameter	Sheath thickness	Approximate outer diameter	Approx. weight	Max.D.C resistance of conductor（20℃）	Current carrying capacity
mm2	mm	mm	mm	mm	kg/km	Ω/km	In Air(A)	In Ground(A)
3X4+1X2.5	0.7/0.7	1.25	1.8	17.8	873	4.61/7.41	26	36
3X6+1X4	0.7/0.7	1.25	1.8	19.1	764	3.08/4.61	33	45
3X10+1X6	0.7/0.7	1.25	1.8	21.6	1002	1.83/3.08	46	60
3X16+1X10	0.7/0.7	1.6	1.8	25.1	1475	1.15/1.83	59	77
3X25+1X16	0.9/0.7	1.6	1.8	28.7	2101	0.727/1.15	77	98
3X35+1X16	0.9/0.7	1.6	1.8	30	2300	0.524/1.15	95	119
3X50+1X25	1/0.9	1.6	2	34.1	2945	0.387/0.727	119	144
3X70+1X35	1.1/0.9	2	2.1	39.2	4131	0.268/0.524	151	175
3X95+1X50	1.1/1.0	2	2.3	43.2	5199	0.193/0.387	186	210
3X120+1X70	1.2/1.1	2.5	2.4	48.8	6827	0.153/0.268	217	242
3X150+1X70	1.4/1.1	2.5	2.6	52.9	7915	0.124/0.268	245	270
3X185+1X95	1.6/1.1	2.5	2.7	57.8	9655	0.0991/0.193	284	305
3X240+1X120	1.7/1.2	2.5	2.9	64.1	11988	0.0754/0.153	336	350
3X300+1X150	1.8/1.4	2.5	3.1	69.8	14475	0.0601/0.124	389	396

0.6/1kV-4+1 core copper conductor XLPE insulated steel wire armored PVC sheathed power cable
Nominal cross sectional area	Insulation thickness	Steel Wire diameter	Sheath thickness	Approximate outer diameter	Approx. weight	Max.D.C resistance of conductor（20℃）	Current carrying capacity
mm2	mm	mm	mm	mm	kg/km	Ω/km	In Air(A)	In Ground(A)
4X4+1X2.5	0.7/0.7	1.25	1.8	18.9	731	4.61/7.41	26	36
4X6+1X4	0.7/0.7	1.25	1.8	20.3	875	3.08/4.61	33	45
4X10+1X6	0.7/0.7	1.6	1.8	23.9	1295	1.83/3.08	46	60
4X16+1X10	0.7/0.7	1.6	1.8	27	1712	1.15/1.83	59	77
4X25+1X16	0.9/0.7	1.6	1.9	31.2	2322	0.727/1.15	77	98
4X35+1X16	0.9/0.7	1.6	1.9	32.8	2759	0.524/1.15	95	119
4X50+1X25	1/0.9	2	2.1	38.5	3860	0.387/0.727	119	144
4X70+1X35	1.1/0.9	2	2.3	43	5010	0.268/0.524	151	175
4X95+1X50	1.1/1.0	2.5	2.4	48.9	6850	0.193/0.387	186	210
4X120+1X70	1.2/1.1	2.5	2.6	54	8395	0.153/0.268	217	242
4X150+1X70	1.4/1.1	2.5	2.7	58.4	9745	0.124/0.268	245	270
4X185+1X95	1.6/1.1	2.5	2.9	64.4	11948	0.0991/0.193	284	305
4X240+1X120	1.7/1.2	2.5	3.1	71.1	14832	0.0754/0.153	336	350
4X300+1X150	1.8/1.4	3.15	3.4	78.9	18826	0.0601/0.124	389	396

0.6/1kV-3+2 core copper conductor XLPE insulated steel wire armored PVC sheathed power cable
Nominal cross sectional area	Insulation thickness	Steel Wire diameter	Sheath thickness	Approximate outer diameter	Approx. weight	Max.D.C resistance of conductor（20℃）	Current carrying capacity
mm2	mm	mm	mm	mm	kg/km	Ω/km	In Air(A)	In Ground(A)
3X4+2X2.5	0.7/0.7	1.25	1.8	18.6	705	4.61/7.41	26	36
3X6+2X4	0.7/0.7	1.25	1.8	20	845	3.08/4.61	33	45
3X10+2X6	0.7/0.7	1.25	1.8	22.5	1109	1.83/3.08	46	60
3X16+2X10	0.7/0.7	1.6	1.8	26.5	1630	1.15/1.83	59	77
3X25+2X16	0.9/0.7	1.6	1.8	30.2	2185	0.727/1.15	77	98
3X35+2X16	0.9/0.7	1.6	1.9	31.3	2505	0.524/1.15	95	119
3X50+2X25	1/0.9	2	2.1	37	3531	0.387/0.727	119	144
3X70+2X35	1.1/0.9	2	2.2	41.1	4572	0.268/0.524	151	175
3X95+2X50	1.1/1.0	2	2.4	45.8	5841	0.193/0.387	186	210
3X120+2X70	1.2/1.1	2.5	2.6	52.1	7765	0.153/0.268	217	242
3X150+2X70	1.4/1.1	2.5	2.7	55.4	8758	0.124/0.268	245	270
3X185+2X95	1.6/1.1	2.5	2.8	60.8	10777	0.0991/0.193	284	305
3X240+2X120	1.7/1.2	2.5	3	67.4	13385	0.0754/0.153	336	350
3X300+2X150	1.8/1.4	2.5	3.2	73.6	16100	0.0601/0.124	389	396

STANDARD	IEC 60502-1, BS 5467 and BS 6346
APPLICATION	Distribution networks, Industrial use
CHEMICAL PERFORMANCE	Chemical & Oil resistance: Good
MECHANICAL PERFORMANCE	Minimum bending raduis: x15cable diameter (unarmoured) Minimum bending raduis: x20 cable diameter (armoured)
FIRE PERFORMANCE	Flame non-propagation base on IEC 60332-1 Reduced emission of Halogens chlorine<15%
TERMINAL PERFORMANCE	Maximum service temperature: 90°C Maximum short-circuit temperature: 150°C(max. 5s) Minimum service temperature: -40°C