Language 
More Language
Language 
BS 215 Part 1 All Aluminum Conductor AAC Centipede 400mm2
Code Word: Centipede
Number of Stranded: 37
Conductor Material: All Aluminum Conductor
Standard: BS 215 Part 1
Email:uvlead@aliyun.com
Email:tlfast@aliyun.com
AAC Conductor Centipede 400mm2 can be used in low and medium voltage overhead lines. It’s commonly used in urban areas because of its ability to carry significant voltages over short distances. The long-lasting, corrosion resistant qualities of aluminum make this conductor a popular choice for use in coastal areas as well as for use in the railway and subway industries. Shipyards and offshore construction sites benefit from the conductor’s durability. AAC Conductor Centipede 400mm2 can be used for most overhead transmission duties when conductor strength is not a factor. The conductor can also be used for primary and secondary distribution applications.
The aluminium wires used in the construction of the conductor shall be material GIE in the H9 condition as specified in BS 26273). a conductor consisting of seven or more aluminium wires of the same nominal diameter twisted together in concentric layers. When the conductor consists of more than one layer, successive layers are twisted in opposite directions
| Code Word: | Centipede |
| Nominal Area (mm2): | 400 |
| Calculate Area (mm2) | 415.2 |
| Stranding: | 37 |
| Diameter Individual Wire Aluminum (mm): | 3.78 |
| Overall Diameter (O.D.) (mm): | 26.46 |
| Weight Per 1000 Meters (kg): | 1145 |
| Rated Strength (KN): | 63.1 |
| Resistance DC 20°C Per 1000 Meters (Ω): | 0.06944 |
| Allowable Ampacity (Amps): | 616 |
